| | 1996 - 1998 Hummer V8, 6.5 L, 395 CID Rebuilt Engine | [
Other Part Stores, Other Makes, Other am_general Engines ]
|
You can count on us for great Car Engines quality. The only difference is that you will not have to pay a fortune for the V8, 6.5 L, 395 CID Rebuilt Engine.
If you Hummer was involved in an accident, or if you know you want to repair the look or the performance of your car, you can do that with our V8, 6.5 L, 395 CID Rebuilt Engine that will change the overall look and/or improve the performance of your Hummer.
To read more about Car Engines Store, please visit our Information page.
|
Hummer Engine Quality
Most rebuilt Hummer engines are just that, rebuilt. Our Hummer remanufacturing line builds to IMPROVE not just REPLACE! All parts in our high quality Hummer performance engines (long blocks, short blocks, big blocks & small blocks) meet or exceed all the Hummer original specifications, and most of the time are purchased from the same suppliers who supply Hummer!
All the moving parts in our Hummer remanufactured engine are NEW. Be cautious of other engine remanufactures using used, broken, re-machined or returned parts!
Due to our precise re-manufacturing standard, the Hummer Engine line has achieved one of the lowest breakdown rates in the world - Below 1.5% breakdown rate
We keep a large inventory of Hummer remanufactured engine blocks mostly for passenger cars, light trucks, pickups and some marine applications. Most of our Hummer engine supply is ready for instant freight.
Hummer Engine Description
ALL OUR Hummer REMANUFACTURED LONG BLOCKS MEET OR EXCEED Hummer SPECIFICATIONS!- Our entire Hummer long blocks (small or big blocks) come with cylinder heads and valve train installed. Note, you have to reuse the existing valve cover(s), timing cover, intake manifold and oil pan from your original Hummer car, truck or SUV.
- The Hummer long blocks have NEW valves, valve springs, valve keepers, push rods, rocker arms, fulcrums, lifters, camshaft, timing chain (belt), timing gears, valve guides (diamond honed), three angle seats, cam, rod and main bearings, pistons, piston rings, rod bushings when applicable, gaskets and oil pump.
- The Hummer cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and shot peened and magnafluxed for cracks. All the Hummer motor bolt holes are tapped.
- The Hummer Cylinder blocks are bored to each piston and diamond honed to 18RMS finish. All oil galleys are hand brushed with white cleaning brushes and cylinders are hand cleaned with cleaning solution and white towels.
- Your Hummer cylinder heads have each valve guide diamond honed, seats are three angle. Following assembly, your Hummer motor heads are vacuum checked for valve seating.
- This Hummer crankshafts are ground and polished to 12RMS. Each oil galley is hand brushed with a white cleaning brush.
- All connecting rods on the Hummer block are honed.
Testimonials |
|
