| | 1977 - 1979 Cadillac V8, 7 L, 425 CID Rebuilt Engine | [
Other Part Stores, Other Makes, Other cadillac Engines ]
|
You will have no problem getting your V8, 7 L, 425 CID Rebuilt Engine shipped to Joppatown, Elwood, Salt Rock, Campbelltown and others.
If you Cadillac was involved in an accident, or if you know you want to repair the look or the performance of your car, you can do that with our V8, 7 L, 425 CID Rebuilt Engine that will change the overall look and/or improve the performance of your Cadillac.
To read more about Car Engines Store, please visit our Information page.
|
Cadillac Engine Quality
Most rebuilt Cadillac engines are just that, rebuilt. Our Cadillac remanufacturing line builds to IMPROVE not just REPLACE! All parts in our high quality Cadillac performance engines (long blocks, short blocks, big blocks & small blocks) meet or exceed all the Cadillac original specifications, and most of the time are purchased from the same suppliers who supply Cadillac!
All the moving parts in our Cadillac remanufactured engine are NEW. Be cautious of other engine remanufactures using used, broken, re-machined or returned parts!
Due to our precise re-manufacturing standard, the Cadillac Engine line has achieved one of the lowest breakdown rates in the world - Below 1.5% breakdown rate
We keep a large inventory of Cadillac remanufactured engine blocks mostly for passenger cars, light trucks, pickups and some marine applications. Most of our Cadillac engine supply is ready for instant freight.
Cadillac Engine Description
ALL OUR Cadillac REMANUFACTURED LONG BLOCKS MEET OR EXCEED Cadillac SPECIFICATIONS!- Our entire Cadillac long blocks (small or big blocks) come with cylinder heads and valve train installed. Note, you have to reuse the existing valve cover(s), timing cover, intake manifold and oil pan from your original Cadillac car, truck or SUV.
- The Cadillac long blocks have NEW valves, valve springs, valve keepers, push rods, rocker arms, fulcrums, lifters, camshaft, timing chain (belt), timing gears, valve guides (diamond honed), three angle seats, cam, rod and main bearings, pistons, piston rings, rod bushings when applicable, gaskets and oil pump.
- The Cadillac cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and shot peened and magnafluxed for cracks. All the Cadillac motor bolt holes are tapped.
- The Cadillac Cylinder blocks are bored to each piston and diamond honed to 18RMS finish. All oil galleys are hand brushed with white cleaning brushes and cylinders are hand cleaned with cleaning solution and white towels.
- Your Cadillac cylinder heads have each valve guide diamond honed, seats are three angle. Following assembly, your Cadillac motor heads are vacuum checked for valve seating.
- This Cadillac crankshafts are ground and polished to 12RMS. Each oil galley is hand brushed with a white cleaning brush.
- All connecting rods on the Cadillac block are honed.
Testimonials |
|
Back to AutoGuide.net
© Copyright 2004-2006: The material on this page is the property of Auto Parts Fair®. All rights reserved.