1972 - 1975 International Rebuilt Engine - AGIHC-392LB

Part Name	V8, 6.4 L, 392 CID Rebuilt Engine
Automobile	International
Stock No.	AGIHC392LB
Description	With improved coolong, water pump tubes attach to block. Motor mounts attach to front of block. Scout appl. Comes with oil pump kit only.
Size	6.4 L, 392 CID
Engine Type	V8
Fuel Type	Gasoline
Fuel Delivery	Carburetor
Aspiration	Non Turbo
Head Casting	379295C
Block Casting	343507C1 343782C91
Crank Casting	151327 151328R2
Warranty
Quality
Notes

Discount/Sale Price	1,878 *
	* - price as of 2/1/2006. Actual prices may vary.

Applications:

1972 - 1973 International 1010

1972 - 1973 International 1110

1974 International 100

1972 - 1973 International 1310

1975 International 150

1974 International 200

1972 - 1973 International 1210

International Engine Quality

Most rebuilt International engines are just that, rebuilt. Our International remanufacturing line builds to IMPROVE not just REPLACE! All parts in our high quality International performance engines (long blocks, short blocks, big blocks & small blocks) meet or exceed all the International original specifications, and most of the time are purchased from the same suppliers who supply International!

All the moving parts in our International remanufactured engine are NEW. Be cautious of other engine remanufactures using used, broken, re-machined or returned parts!

Due to our precise re-manufacturing standard, the International Engine line has achieved one of the lowest breakdown rates in the world - Below 1.5% breakdown rate

We keep a large inventory of International remanufactured engine blocks mostly for passenger cars, light trucks, pickups and some marine applications. Most of our International engine supply is ready for instant freight.

International Engine Description

ALL OUR International REMANUFACTURED LONG BLOCKS MEET OR EXCEED International SPECIFICATIONS!

Our entire International long blocks (small or big blocks) come with cylinder heads and valve train installed. Note, you have to reuse the existing valve cover(s), timing cover, intake manifold and oil pan from your original International car, truck or SUV.
The International long blocks have NEW valves, valve springs, valve keepers, push rods, rocker arms, fulcrums, lifters, camshaft, timing chain (belt), timing gears, valve guides (diamond honed), three angle seats, cam, rod and main bearings, pistons, piston rings, rod bushings when applicable, gaskets and oil pump.
The International cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and shot peened and magnafluxed for cracks. All the International motor bolt holes are tapped.
The International Cylinder blocks are bored to each piston and diamond honed to 18RMS finish. All oil galleys are hand brushed with white cleaning brushes and cylinders are hand cleaned with cleaning solution and white towels.
Your International cylinder heads have each valve guide diamond honed, seats are three angle. Following assembly, your International motor heads are vacuum checked for valve seating.
This International crankshafts are ground and polished to 12RMS. Each oil galley is hand brushed with a white cleaning brush.
All connecting rods on the International block are honed.

Testimonials

Back to AutoGuide.net