| | 1981 - 1985 Isuzu L4, 1.8 L, 1817 CC Rebuilt Engine | [
Other Part Stores, Other Makes, Other isuzu Engines ]
|
Why Westgate Car Engines dealers, Roseville Car Engines dealers, Spring Valley Car Engines dealers, and local Isuzu dealers don’t want you to know about our online Car Engines store? They are afraid you will realize how much you can save if you buy the L4, 1.8 L, 1817 CC Rebuilt Engine here! Save up to 70% on Car Engines! Buy the Isuzu L4, 1.8 L, 1817 CC Rebuilt Engine here!
You will not be able to beat the discounted price of our L4, 1.8 L, 1817 CC Rebuilt Engine. You will come back for more Isuzu Car Engines.
To read more about Car Engines Store, please visit our Information page.
|
Isuzu Engine Quality
Most rebuilt Isuzu engines are just that, rebuilt. Our Isuzu remanufacturing line builds to IMPROVE not just REPLACE! All parts in our high quality Isuzu performance engines (long blocks, short blocks, big blocks & small blocks) meet or exceed all the Isuzu original specifications, and most of the time are purchased from the same suppliers who supply Isuzu!
All the moving parts in our Isuzu remanufactured engine are NEW. Be cautious of other engine remanufactures using used, broken, re-machined or returned parts!
Due to our precise re-manufacturing standard, the Isuzu Engine line has achieved one of the lowest breakdown rates in the world - Below 1.5% breakdown rate
We keep a large inventory of Isuzu remanufactured engine blocks mostly for passenger cars, light trucks, pickups and some marine applications. Most of our Isuzu engine supply is ready for instant freight.
Isuzu Engine Description
ALL OUR Isuzu REMANUFACTURED LONG BLOCKS MEET OR EXCEED Isuzu SPECIFICATIONS!- Our entire Isuzu long blocks (small or big blocks) come with cylinder heads and valve train installed. Note, you have to reuse the existing valve cover(s), timing cover, intake manifold and oil pan from your original Isuzu car, truck or SUV.
- The Isuzu long blocks have NEW valves, valve springs, valve keepers, push rods, rocker arms, fulcrums, lifters, camshaft, timing chain (belt), timing gears, valve guides (diamond honed), three angle seats, cam, rod and main bearings, pistons, piston rings, rod bushings when applicable, gaskets and oil pump.
- The Isuzu cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and shot peened and magnafluxed for cracks. All the Isuzu motor bolt holes are tapped.
- The Isuzu Cylinder blocks are bored to each piston and diamond honed to 18RMS finish. All oil galleys are hand brushed with white cleaning brushes and cylinders are hand cleaned with cleaning solution and white towels.
- Your Isuzu cylinder heads have each valve guide diamond honed, seats are three angle. Following assembly, your Isuzu motor heads are vacuum checked for valve seating.
- This Isuzu crankshafts are ground and polished to 12RMS. Each oil galley is hand brushed with a white cleaning brush.
- All connecting rods on the Isuzu block are honed.
Testimonials |
|
Back to AutoGuide.net
© Copyright 2004-2006: The material on this page is the property of Auto Parts Fair®. All rights reserved.