| | 1996 - 1998 Jeep L6, 4 L, 242 CID Rebuilt Engine | [
Other Part Stores, Other Makes, Other jeep Engines ]
|
Your L6, 4 L, 242 CID Rebuilt Engine will be delivered to any US destination including Spring Glen, Parq Las Mercedes, Snapper Creek and Teaneck.
There is no better place in Galisteo, Coburn and others, to shop for L6, 4 L, 242 CID Rebuilt Engine then at our online Car Engines store. We guarantee that you will be satisfied with your shopping experience and you will be happy with the quality of the L6, 4 L, 242 CID Rebuilt Engine that you purchase with us.
To read more about Car Engines Store, please visit our Information page.
|
Jeep Engine Quality
Most rebuilt Jeep engines are just that, rebuilt. Our Jeep remanufacturing line builds to IMPROVE not just REPLACE! All parts in our high quality Jeep performance engines (long blocks, short blocks, big blocks & small blocks) meet or exceed all the Jeep original specifications, and most of the time are purchased from the same suppliers who supply Jeep!
All the moving parts in our Jeep remanufactured engine are NEW. Be cautious of other engine remanufactures using used, broken, re-machined or returned parts!
Due to our precise re-manufacturing standard, the Jeep Engine line has achieved one of the lowest breakdown rates in the world - Below 1.5% breakdown rate
We keep a large inventory of Jeep remanufactured engine blocks mostly for passenger cars, light trucks, pickups and some marine applications. Most of our Jeep engine supply is ready for instant freight.
Jeep Engine Description
ALL OUR Jeep REMANUFACTURED LONG BLOCKS MEET OR EXCEED Jeep SPECIFICATIONS!- Our entire Jeep long blocks (small or big blocks) come with cylinder heads and valve train installed. Note, you have to reuse the existing valve cover(s), timing cover, intake manifold and oil pan from your original Jeep car, truck or SUV.
- The Jeep long blocks have NEW valves, valve springs, valve keepers, push rods, rocker arms, fulcrums, lifters, camshaft, timing chain (belt), timing gears, valve guides (diamond honed), three angle seats, cam, rod and main bearings, pistons, piston rings, rod bushings when applicable, gaskets and oil pump.
- The Jeep cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and shot peened and magnafluxed for cracks. All the Jeep motor bolt holes are tapped.
- The Jeep Cylinder blocks are bored to each piston and diamond honed to 18RMS finish. All oil galleys are hand brushed with white cleaning brushes and cylinders are hand cleaned with cleaning solution and white towels.
- Your Jeep cylinder heads have each valve guide diamond honed, seats are three angle. Following assembly, your Jeep motor heads are vacuum checked for valve seating.
- This Jeep crankshafts are ground and polished to 12RMS. Each oil galley is hand brushed with a white cleaning brush.
- All connecting rods on the Jeep block are honed.
Testimonials |
|
Back to AutoGuide.net
© Copyright 2004-2006: The material on this page is the property of Auto Parts Fair®. All rights reserved.