Mitsubishi Van Parts Genaral Catalog |
| Description:
| Radiator Cap
| | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Brand:
| Futaba | | Part Number:
| G1010-51074/FUT | | Retail Price:
| $22.80 | $13.45 * |
|  | | Description:
| Spark Plug use 4 of NGK BPR6ES-11 | | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Brand:
| NGK | | Part Number:
| F1000-37057/NGK | | Retail Price:
| $7.40 | $4.45 * |
|
| Description:
| Water Temperature Sender
| | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Part Number:
| P4036-29916 | | Retail Price:
| $30.42 | $17.45 * |
|  | | Description:
| Headlight Sealed Beam Halogen, Sealed Beam | | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) 6 1/2"x 4" Rectangular Hi/Low Beam, Halogen Type. | | Brand:
| Osram/Sylvania | | Part Number:
| P8045-43271/OSR | | Retail Price:
| $17.10 | $9.45 * |
|
| Description:
| Wiper Blade Micro Edge, Left/ Right | | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Brand:
| Bosch | | Part Number:
| P7030-20093/BOS | | Retail Price:
| $18.96 | $12.45 * |
|  | | Description:
| Oil Filter
| | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Brand:
| Denso | | Part Number:
| A6000-116741/ND | | Retail Price:
| $11.95 | $11.45 * |
|
| Description:
| Crankshaft Seal OEM, Front | | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Brand:
| CFW/NOK | | Part Number:
| A8060-104038/NOK | | Retail Price:
| $21.87 | $14.45 * |
|  | | Description:
| Rod Bearing Set Standard | | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Brand:
| NDC Bearings | | Part Number:
| A2030-86046/NDC | | Retail Price:
| $128.99 | $25.95 * |
|
| Description:
| Camshaft Seal Left/ Right | | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) | | Brand:
| CFW/NOK | | Part Number:
| A8080-115273/NOK | | Retail Price:
| $13.23 | $8.45 * |
|  | | Description:
| Cam Follower Hyraulic valve adjuster 8 per engine | | Fits:
| 1990 Mitsubishi Van Air-Cool (Engine: CV2.0) When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. | | Part Number:
| A4010-104019 | | Retail Price:
| $28.25 | $15.45 * |
|
* - price as of 06/24/2009. Actual prices may vary.