| | 1988 Toyota L4, 1.6 L, 1587 CC Rebuilt Engine | [
Other Part Stores, Other Makes, Other toyota Engines ]
|
Whether you live in Russell Township, Britt, Lathrop, Hindsville and others, there is no reason to run around town for the Toyota Car Engines you need. You can get the L4, 1.6 L, 1587 CC Rebuilt Engine right here and more.
You will be sure to get the L4, 1.6 L, 1587 CC Rebuilt Engine that you deserve and you will save money at the same time.
To read more about Car Engines Store, please visit our Information page.
|
Toyota Engine Quality
Most rebuilt Toyota engines are just that, rebuilt. Our Toyota remanufacturing line builds to IMPROVE not just REPLACE! All parts in our high quality Toyota performance engines (long blocks, short blocks, big blocks & small blocks) meet or exceed all the Toyota original specifications, and most of the time are purchased from the same suppliers who supply Toyota!
All the moving parts in our Toyota remanufactured engine are NEW. Be cautious of other engine remanufactures using used, broken, re-machined or returned parts!
Due to our precise re-manufacturing standard, the Toyota Engine line has achieved one of the lowest breakdown rates in the world - Below 1.5% breakdown rate
We keep a large inventory of Toyota remanufactured engine blocks mostly for passenger cars, light trucks, pickups and some marine applications. Most of our Toyota engine supply is ready for instant freight.
Toyota Engine Description
ALL OUR Toyota REMANUFACTURED LONG BLOCKS MEET OR EXCEED Toyota SPECIFICATIONS!- Our entire Toyota long blocks (small or big blocks) come with cylinder heads and valve train installed. Note, you have to reuse the existing valve cover(s), timing cover, intake manifold and oil pan from your original Toyota car, truck or SUV.
- The Toyota long blocks have NEW valves, valve springs, valve keepers, push rods, rocker arms, fulcrums, lifters, camshaft, timing chain (belt), timing gears, valve guides (diamond honed), three angle seats, cam, rod and main bearings, pistons, piston rings, rod bushings when applicable, gaskets and oil pump.
- The Toyota cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and shot peened and magnafluxed for cracks. All the Toyota motor bolt holes are tapped.
- The Toyota Cylinder blocks are bored to each piston and diamond honed to 18RMS finish. All oil galleys are hand brushed with white cleaning brushes and cylinders are hand cleaned with cleaning solution and white towels.
- Your Toyota cylinder heads have each valve guide diamond honed, seats are three angle. Following assembly, your Toyota motor heads are vacuum checked for valve seating.
- This Toyota crankshafts are ground and polished to 12RMS. Each oil galley is hand brushed with a white cleaning brush.
- All connecting rods on the Toyota block are honed.
Testimonials |
|
Back to AutoGuide.net
© Copyright 2004-2006: The material on this page is the property of Auto Parts Fair®. All rights reserved.